Design and Simulation of a WDM-OADM Optical Ring Communication System

Authors

  • A. ZITOUNI Laboratory of Signals and Systems, Institute of Electrical and Electronic Engineering, University M’hamed Bougara of Boumerdes, Avenue de l’indépendance, 35000, Algeria
  • A. RECIOUI Laboratory of Signals and Systems, Institute of Electrical and Electronic Engineering, University M’hamed Bougara of Boumerdes, Avenue de l’indépendance, 35000, Algeria
  • A. SICHONE Laboratory Signals and Systems, Institute of Electrical and Electronic Engineering, University M’hamed Bougara of Boumerdes. Avenue de l’indépendance, 35000, Boumerdes, Algeria
  • A. SENOUSSAOU Laboratory of Signals and Systems, Institute of Electrical and Electronic Engineering, University M’hamed Bougara of Boumerdes, Avenue de l’indépendance, 35000, Algeria

DOI:

https://doi.org/10.51485/ajss.v2i3.40

Keywords:

SMF, WDM, DWDM, OADM, EDFA, DCF, optical fiber network

Abstract

The advent of nodal elements, such as Optical Add/Drop Multiplexers (OADM) for Wavelength Division Multiplexed (WDM) networks, has led to a myriad of possible network architectures for the optical layer. In this project we design and simulate a WDM-OADM optical ring system of four nodes, two wavelengths on unidirectional single mode fiber at data rates of up to 10 Gbps. We use a continuous wave laser as a source for each channel with external modulation. The performance of the system is reported on the basis of eye diagram, Bit Error Rate (BER) and Q-factor. Optisystem software is used to simulate the overall designed system.

Downloads

Download data is not yet available.

Downloads

Published

2017-09-15

How to Cite

[1]
ZITOUNI, A., RECIOUI, A., SICHONE, A. and SENOUSSAOU, A. 2017. Design and Simulation of a WDM-OADM Optical Ring Communication System. Algerian Journal of Signals and Systems . 2, 3 (Sep. 2017), 140-148. DOI:https://doi.org/10.51485/ajss.v2i3.40.

Issue

Section

Articles