Fault Detection in Wide Area Monitoring Systems via PMU Optimal Placement

Authors

  • Abdelmadjid RECIOUI Signals and Systems Laboratory, Institute of Electrical and Electronic Engineering University of Boumerdes, Avenue of the Independence, 35000, Boumerdès, Algeria
  • Mohamed TAZIBT Laboratory Signals and Systems, Institute of Electrical and Electronc Engineering, University M’hamed Bougara of Boumerdes, Avenue de l’indépendance, 35000, Algeria
  • Hakim BENHENNI Laboratory of Signals and Systems, Institute of electrical and electronic engineering, University M’hamed Bougara of Boumerdes, Avenue de l’indépendance, 35000, Boumerdes, Algeria

DOI:

https://doi.org/10.51485/ajss.v2i3.41

Keywords:

smart grids, Phasor measurement units, PMU Placement, fault location

Abstract

The Phasor measurement units (PMUs) have become more and more attractive in power engineering as they can provide synchronized measurements of real-time voltage and currents phasors. The objective of this work is twofold: first, the optimal placement of PMUs is done in the standardized IEEE systems. Next, fault location is determined based on the measurements collected from these PMUs. The simulations are carried out using MATLAB SIMULINK. The results show that it is possible to exploit the PMU measurement data to locate and hence cure the faults in the power system.

Downloads

Download data is not yet available.

Downloads

Published

2017-09-15

How to Cite

[1]
RECIOUI, A., TAZIBT, M. and BENHENNI, H. 2017. Fault Detection in Wide Area Monitoring Systems via PMU Optimal Placement. Algerian Journal of Signals and Systems . 2, 3 (Sep. 2017), 149- 161. DOI:https://doi.org/10.51485/ajss.v2i3.41.

Issue

Section

Articles