DVR and D-STATCOM Mitigation Techniques of Power Quality Effects on Induction Motors

Authors

  • Fatma Zohra DEKHANDJI Laboratory Signals and Systems, Institute of Electrical and Electronic Engineering, University M’hamed Bougara of Boumerdes. Avenue de l’indépendance, 35000, Boumerdes, Algeria
  • Mohamed DOUCHE Laboratory of Signals and Systems, Institute of Electrical and Electronic Engineering, University M’hamed Bougara of Boumerdes, Avenue de l’indépendance, 35000, Algeria
  • Nacer ZEBIDI Laboratory Signals and Systems, Institute of Electrical and Electronic Engineering, University M’hamed Bougara of Boumerdes. Avenue de l’indépendance, 35000, Boumerdes, Algeria

DOI:

https://doi.org/10.51485/ajss.v2i2.38

Keywords:

Power quality, mitigation, induction motor, D-STATCOM, DVR

Abstract

Power quality disturbances have always been a major concern among engineers. Any slight variation in voltage amplitude or frequency can cause customer equipment to fail, at a substantial cost in time and money.In this project we will use some mitigation techniques to protect the induction motor from excessive temperature (additional losses and high currents) and the rotor vibration torque pulsation caused by power quality disturbances.These mitigation techniques reduce the effects of the power quality disturbances on the induction motor, where the simulations done using MATLAB/SIMULINK.

Downloads

Download data is not yet available.

Downloads

Published

2017-06-15

How to Cite

[1]
DEKHANDJI, F.Z. , DOUCHE, M. and ZEBIDI, N. 2017. DVR and D-STATCOM Mitigation Techniques of Power Quality Effects on Induction Motors. Algerian Journal of Signals and Systems . 2, 2 (Jun. 2017), 110- 129. DOI:https://doi.org/10.51485/ajss.v2i2.38.

Issue

Vol. 2 No. 2 (2017)

Section

Articles

License

Copyright (c) 2017 Fatma Zohra DEKHANDJI, Mohamed DOUCHE, Nacer ZEBIDI

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.